Posted on: 16 October 2015
Most people never think about the wiring that is behind the wall of the outlet they plug their cell phone charger into. Most people do not consider the age of their home's wiring because their lights still come on and their appliances still run smoothly. However, learning more about the wiring in your home that could be a hidden danger is important to avoid a house fire.
Outdated Wiring Can Be Deadly
In older homes, wiring can have bare spots caused by the insulation on it dry rotting. If a wire was ever compromised due to a fuse pushing too much amperage, it could still be a danger after the fuse was replaced with one supplying the proper amount of amperage. If you have never had the wiring inspected in your older home, doing so is always best to avoid wiring issues that could lead to a fire. The wire with a bare spot in its insulation can arc and create just enough sparks to ignite your home.
Overlamping Creates Serious Safety Hazards
Putting a lightbulb into a socket that is not designed for the number of watts designated on the bulb can be unsafe. A bulb in a socket that is designed for fewer watts can melt the socket, causing a fire. Always use bulbs that carry the appropriate wattage for the sockets in your home. If you live in an older house, be sure to use only bulbs that produce 60 watts or less for ensuring their safe usage.
Weatherhead Issues Can Cause Deadly Arcing
The fitting on the outside of your house that connects it to the main wires coming from the pole can be a source of danger. If the insulation on the weather head is frayed or otherwise compromised from exposure to the elements, it could arc when a strong wind blows it while the current is live in it. If you notice your lights flickering when the winds get high outside, having a look at the weatherhead is smart. If you see frayed wiring, contact your electrical company for having repairs made as soon as possible.
Rewiring Outlets That Have Been Backstabbed Is Best
Checking your home's electrical outlets to make sure the wires are attached to the screw terminals instead of being stuck into the back is smart. This is called backstabbing and while it is a common practice and not a code violation, the wires are more likely to come loose from the outlets and become a deadly fire hazard. When wires are firmly attached to screw terminals, their chances of coming loose are lessened. If one of your outlets is backstabbed, the rest of them throughout your home may be as well, so checking them all and rewiring them to their screw terminals is advised.
For more information, contact companies like Allied Electric Inc.Share